【资料】IEEE 802.11a WLAN model

[yesman]

Author: Martin Clark
Summary: IEEE 802.11a WLAN physical layer model, with demonstration of adaptive modulation and coding.
MATLAB Release: R13
Required Products: Communications Toolbox,Communications Blockset,Signal Processing Blockset,Signal Processing Toolbox,Simulink
Description: * End-to-end 802.11a physical layer
* All mandatory and optional data rates: 6, 9, 12, 18, 24, 36, 48, and 54 Mb/s
* BPSK, QPSK, 16-QAM, 64-QAM modulations
* Forward error correction coding (convolutional; code rates 1/2, 2/3, 3/4)
* OFDM transmission: 52 subcarriers, 4 pilots, 64-pt FFTs, circular prefix
* Data interleaving
* PLCP preamble (modeled as 2x2 long training sequences)
* Receiver equalization
* Viterbi decoding
* Data rates selectable on-the-fly
* Adaptive modulation demo over dispersive multipath fading channel

Instructions:

1. Unzip to a new folder.

2(a). If you are running under R13 (MATLAB 6.5), change the MATLAB current directory to the subdirectory R13, then open the 'IEEE80211a_NoSF' mdl file. (If you have Stateflow, you can also run the enhanced version, IEEE80211a.mdl.)

2(b). If you are running under R13SP1 (MATLAB 6.5.1), change the MATLAB current directory to the subdirectory R13SP1, then open the 'IEEE80211a' mdl file.

Zip文件内容: readme.txt, IEEE80211a_graphics.fig, IEEE80211a_graphics.m, IEEE80211a_init.mat, IEEE80211a_lib.mdl, IEEE80211a_open_graphics.m, IEEE80211a_settings.m, IEEE80211a_udg.m, IEEE80211a.mdl, IEEE80211a_open_graphics.m, IEEE80211a_graphics.fig, IEEE80211a_graphics.m, IEEE80211a_init.mat, IEEE80211a_lib.mdl, IEEE80211a_NoSF.mdl, IEEE80211a.mdl, IEEE80211a_settings.m, IEEE80211a_sfun.dll, IEEE80211a_udg.m

[fudianhua]

xiexie , i need this

[liudingtao]

好样的。..谢谢...

好样的。..谢谢...

[redspider]

太好了，受益匪浅，谢谢楼主

[menghuan]

感谢搂主！！！！！